Consumer Bill Payment: Which Billers a CBPS Can Pay
Visa allows 17 biller categories for a US consumer bill payment provider. Insurance, telecom and cable are not among them, though other regions allow them.
By Jeffrey Anderson

- Section 5.12.1 (ID# 0030635) allows a US consumer bill payment service provider to serve 17 biller MCCs, covering rent, utilities, medical, legal, education, childcare and tax payments.
- Insurance premiums (6300), telecommunication services (4814) and cable, satellite or streaming (4899) are absent from the US allowed list while appearing in other regions, so a US CBPS cannot code those billers correctly.
- A biller that does not fit an allowed MCC is ineligible for the program and must use MCC 4829, money transfer, which moves it out of the program rather than recoding it inside.
- Registration is a permission rather than a filing: the acquirer must obtain written approval for each CBPS before processing, and Visa decides biller eligibility at its sole discretion.
- The CBPS must disclose before the transaction that it is the merchant and that the payment is only a transfer of money to a third party, then give the cardholder the biller name, amount, transaction date and the biller payment date and method for at least 120 days.
- A CBPS may only aggregate payments to a single biller, the exact opposite of the BPSP rule barring aggregation of multiple buyers into one supplier payment, which is the clearest signal that the two models are not variants of each other.
Consumer bill payment service providers let a cardholder pay a bill to a biller that does not accept cards. Visa allows 17 biller categories in the US, and three of the most obvious consumer bills are not among them: insurance premiums, telephone service, and cable or streaming.
Other regions allow those. The US list does not. That is the first thing to check before building anything on this model.
What a CBPS Is
Visa defines it in a footnote to Section 5.12.1 of the Visa Core Rules and Visa Product and Service Rules (ID# 0030635): "A Merchant that provides a payment solution that allows Cardholders to pay qualifying billers. A biller may or may not be a Merchant."
That last sentence is the whole point of the arrangement. The biller may not be a Visa merchant at all, which is why the cardholder is paying the CBPS rather than the biller, and why Visa puts the compliance burden on the CBPS and its acquirer.
Registration Needs Written Approval, Per Provider
Most Visa registrations are a filing. This one is a permission. The acquirer must "Register the CBPS with Visa and obtain written approval for each CBPS before processing any Transactions as a CBPS", and the rule adds that "Visa may, at its sole discretion, determine whether a third-party biller is eligible to participate in the CBPS program".
So two discretionary gates sit above the model: approval of the provider, and Visa's view on whether a given biller qualifies at all. Neither is something you can satisfy by meeting a published test. The third party agent registration regime behaves the same way, and a CBPS is explicitly outside the affiliate exemption that regime offers.
The 17 Biller Categories Allowed in the US
Table 5-34 lists allowed MCCs per region. The US entries are:
- 4900 utilities, covering electric, gas, water and sanitary
- 6012 financial institutions, for merchandise, services and debt repayment
- 6051 non-financial institutions, covering foreign currency, cryptocurrency, money orders, account funding, travellers cheques and debt repayment
- 6513 real estate agents and managers, rentals
- 8011 doctors and physicians
- 8050 nursing and personal care facilities
- 8062 hospitals
- 8099 medical services and health practitioners
- 8111 legal services and attorneys
- 8211 elementary and secondary schools
- 8220 colleges, universities, professional schools and junior colleges
- 8241 correspondence schools
- 8244 business and secretarial schools
- 8249 trade and vocational schools
- 8299 schools and educational services
- 8351 child care services
- 9311 tax payments
Read as a group, that is rent, utilities, medical, legal, education, childcare and tax. It is a list of obligations rather than purchases.
What the US List Leaves Out
This is where the regional comparison earns its keep. The US list runs to 17 MCCs and matches Canada and CEMEA exactly. Three codes that appear in other regions' lists are absent from the US one:
- 6300, insurance sales, underwriting and premiums. Allowed in the AP and LAC regions. Not in the US.
- 4814, telecommunication services. Allowed in the Europe and LAC regions. Not in the US.
- 4899, cable, satellite and other pay television, radio or streaming. Allowed in the LAC region. Not in the US.
If you are a US provider planning to cover insurance premiums or phone and cable bills, the rule does not let you code those billers correctly, and coding a biller incorrectly is not a workaround. Visa requires the CBPS to use "the appropriate MCC to identify a biller" from that table.
The 4829 Fallback Is Not a Loophole
The rule does say what happens when a biller does not fit: "If unable to use the biller MCC or meet the requirements, the biller is ineligible for the program and must use MCC 4829."
MCC 4829 is money transfer. So a biller outside the list does not simply get coded differently inside the program. It leaves the program, and the transaction becomes a money transfer, which carries its own treatment, its own interchange and its own issuer risk posture. Expect decline rates to look different.
Billers Must Be in Your Country
In the AP, Canada, CEMEA, LAC and US regions, the CBPS "Makes payments only to billers that are businesses located in the same country as the CBPS". Europe gets a wider rule, where billers may sit anywhere in the EEA if the CBPS and the acquirer hold the necessary approvals in the biller's country.
Note also that the rule says businesses. A CBPS cannot be used to pay an individual.
You Have to Tell the Cardholder You Are the Merchant
This is the consumer-facing obligation and it is unusually direct. The CBPS must clearly disclose to the cardholder, before the transaction takes place, that it is the merchant and that the transaction "involves only the transfer of money from the Cardholder to the third party".
Then, after the transaction, the CBPS must give the cardholder access for at least 120 days following the transaction processing date to all of:
- Biller name
- Total transaction amount in the transaction currency
- Transaction date
- Biller payment date and method
The biller payment date and method is the interesting one. The cardholder is entitled to know not just that they paid, but when and how the money reached the biller, which is the question every disputed bill payment turns on.
The Descriptor Carries Two Names
Every CBPS transaction must include "CBPS name and biller name in the Merchant name field" plus a CBPS identifier, and a business application identifier (BAI) associated with the CBPS goes on every participating transaction.
Two names in one field is a real constraint when the field is short. If you have ever seen a statement line that looks like a payment processor followed by a truncated utility name, that is this rule. The general mechanics of what fits and what gets cut are in billing descriptors.
Card Type Has to Match
A small clause with sharp edges: if the CBPS uses a card to pay the biller, it "only uses a Visa Commercial Card if the Cardholder paid using a Visa Commercial Card".
So the funding leg has to match the consumer leg on product type. A CBPS cannot collect on a consumer card and settle to the biller on a commercial card.
Aggregation Runs the Opposite Way to a BPSP
The CBPS rule says it "Only aggregates payments to a single biller". The business payment solution provider rule says the opposite: a BPSP must never aggregate payments from multiple buyers into one payment per supplier.
That difference tells you what each model is for. A CBPS batches many cardholders' payments toward one biller, which is how bill payment works at scale. A BPSP must keep each buyer's payment to each supplier separate, because the buyer carries the supplier non-performance risk and the payment has to be traceable to the buyer who approved it.
The two models sit in adjacent sections of the rulebook and look superficially similar. They are not. One serves consumers paying obligations, the other serves businesses paying suppliers, and almost every operational clause differs.
What To Check Before You Build
- Is every biller you intend to serve inside the 17 US MCCs? If insurance, telecom or cable is on your roadmap, it is not.
- Is every biller a business in the US? Individuals and foreign billers are out.
- Can your descriptor carry both your name and the biller's name legibly?
- Can you show a cardholder the biller payment date and method for 120 days?
- Does your disclosure, before the transaction, say plainly that you are the merchant and that this is only a transfer of money to a third party?
The first two are eligibility. The last three are the ones that tend to get built late and then need rework.
FAQ
What is a consumer bill payment service provider?
Visa's footnote to Section 5.12.1 defines it as a merchant that provides a payment solution letting cardholders pay qualifying billers, and notes that a biller may or may not itself be a merchant.
What happens to a biller that does not fit an allowed MCC?
It is ineligible for the program and must use MCC 4829, money transfer. The transaction leaves the CBPS program rather than being recoded inside it.
Can a CBPS pay a biller in another country?
Not in the US. The rule limits a CBPS in the AP, Canada, CEMEA, LAC and US regions to billers that are businesses located in the same country as the CBPS. Only in Europe can billers sit elsewhere in the EEA, and only with the right approvals.
How is a CBPS different from a BPSP?
A CBPS serves consumers paying bills and may only aggregate payments to a single biller. A BPSP serves business buyers paying suppliers, must never aggregate payments from multiple buyers into one supplier payment, codes everything as MCC 7399, and becomes commercial-card-only on 18 April 2027.
Jeffrey Anderson, Merchant Placement Specialist
Merchant placement specialist at Gray Merchants. Jeffrey works directly with acquiring-bank underwriting teams across the firm’s 70+ banking relationships to place high-risk and hard-to-place businesses, structure multi-MID accounts, and keep flagged merchants processing. His writing draws on the placement files he works every week: what underwriters ask for, why accounts get declined, and what keeps an approved account open.